Technical Information
Geotextile Specifications
- Introduction
- Road Construction/Subgrade Stabilization
- Drainage
- Prefabricated Drainage Composites
- Erosion Control
- Sediment Control/Silt Fence
- Waste Related Applications
- Appendix A: ASTM Test Methods
- Appendix B: Thrace-LINQ, Inc. Specification Summary
Product MSDS
Technical Notes
- Understanding Minimum Average Roll Value (MARV)
- Geotextile Sewing Techniques
- Installation Guidelines for Roads and Other Horizontal Surfaces
- Erosion Control Installation Guidelines
- Prefabricated Drainage Composites: Battle Drain Installation Guidelines
- Permeability? Permittivity? What Should be Specified?
- The Role of Mullen Burst in Geosynthetic Specifications
- Addressing UV Stability with Thrace-LINQ Geosynthetics
- Filtration Design: A Look at the State of the Practice
- Designing Geotextile Retaining Walls
- High Strength Geotextiles: Long Term Design Allowable Strength
- Using AOL(125EX) and AOH(130EX) Effectively in Asphalt Overlay Applications
- Installation Procedures for Thrace-LINQ, Inc. TAC 711N
- Sampling and Sampling Frequency of Nonwoven Geosynthetics
- Freight Complexities
- Chemical Resistance of Polypropylenes
- Geotextiles Versus Geogrids in Pavements
- Thermal Welding of Nonwoven Geosynthetics
- Subgrade Stabilization/Separation
- Metric Conversion Factors for Geosynthetics
- GTF 550T/1000T/1500T High Strength Geosynthetics Chemical Resistance of Polyester Filament Yarns
- AASHTO M288-96 Standard Specifications for Geosynthetics
